ZX16V.net http://www.zx16v.net/forum/ |
|
Exhaust manifold http://www.zx16v.net/forum/viewtopic.php?f=1&t=687 |
Page 1 of 1 |
Author: | ZX-1993 [ Fri Sep 16, 2011 3:03 pm ] |
Post subject: | Exhaust manifold |
Hello, does anyone know of the best way to remove the exhaust manifold? The area around it is so tight. which way does it come out? Basically I have a 8 branch manifold that I want to fit. Tony |
Author: | welshpug [ Fri Sep 16, 2011 8:26 pm ] |
Post subject: | Re: Exhaust manifold |
on the RFY it'll come out the top easily enough if you remove the top r/h engine mounting arm and tilt the engine forwards. fitting the new manifold will be a different task though, easiest way is to drop the subframe complete, unless the manifold is in 2 parts? not seen any 8 branck manifolds, most are just 4. |
Author: | ZX-1993 [ Fri Sep 16, 2011 9:19 pm ] |
Post subject: | Re: Exhaust manifold |
Ok cool ill do that.. Its just one piece. The manifold is off a 405 Mi16. (if I recall correctly) Nice one |
Author: | welshpug [ Fri Sep 16, 2011 10:25 pm ] |
Post subject: | Re: Exhaust manifold |
that wont fit in a zx, the shape is quite different |
Author: | ZX-1993 [ Fri Sep 16, 2011 10:57 pm ] |
Post subject: | Re: Exhaust manifold |
The actual stud pattern on top is different, i was going to make a long 'washer' to clamp it up to the head. Or is it the actual physical size of the manifold? |
Author: | Razkin [ Sat Sep 17, 2011 8:44 am ] |
Post subject: | Re: Exhaust manifold |
It's longer and the angle is different. So modifications to the downpipe are necessary. |
Author: | ZX-1993 [ Sat Sep 17, 2011 3:24 pm ] |
Post subject: | Re: Exhaust manifold |
ah ok, I might just forget about that one then. |
Author: | welshpug [ Sat Sep 17, 2011 8:49 pm ] |
Post subject: | Re: Exhaust manifold |
if you want a decent manifold for it get in tough with miles at pugracing, not too far from you in Fordingbridge. |
Author: | dugy cam [ Sun Oct 02, 2011 8:51 pm ] |
Post subject: | Re: Exhaust manifold |
ther is one on ebay the now pricely but ther is one so they say |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |