It is currently Thu Mar 28, 2024 11:11 am

All times are UTC + 2 hours




 Page 1 of 1 [ 8 posts ] 
Author Message
 Post subject: Diaphragms
PostPosted: Sat Oct 04, 2008 3:28 am 

Joined: Mon Sep 22, 2008 10:15 pm
Posts: 3
Hi guys
Looks like I have troubless with my avac. When I rev the engine diaphragms moves up and stay up. I know that they shoul move up when rev and move down when on idlle. But mine want move down. Iw tryed test diaphragms with mouth and they work well. iw tryed to disconect line wich is going from electro valve to diaphragmas and car goes bad at low rpm but from 5000-7000 goes sick, when I conect everyting like it should be car goes well from 3000-5000 but after is dead. When I disconect conector which is going from ecu to electro valve car goes well only from 5000-7000rpm .
Here is vid how they should work http://smg.photobucket.com/albums/v214/ ... _A0015.flv
here is a pic how it looks like conected http://img150.imageshack.us/img150/4208 ... 197ek3.jpg

Does anyone know what is problem


TNX a lot


Last edited by paky on Sat Oct 04, 2008 1:31 pm, edited 1 time in total.

Offline
 Profile  
 
 Post subject:
PostPosted: Sat Oct 04, 2008 1:24 pm 
User avatar

Joined: Sun Jul 24, 2005 11:35 am
Posts: 907
Location: Harderwijk - The Netherlands
So when you rev they move, and when it falls to idle they wont move back?

BTW both your links dont work.


Offline
 Profile  
 
 Post subject:
PostPosted: Sat Oct 04, 2008 2:24 pm 

Joined: Mon Sep 22, 2008 10:15 pm
Posts: 3
ZX-Cruiser wrote:
So when you rev they move, and when it falls to idle they wont move back?

BTW both your links dont work.


links repaired,yep here is video

Image


Offline
 Profile  
 
 Post subject:
PostPosted: Sat Oct 04, 2008 8:32 pm 
Site Admin
User avatar

Joined: Sun Jul 24, 2005 4:28 pm
Posts: 626
Location: Rotterdam
I think the vacuumhoses at the electric solenoid aren't installed correctly. So switch those 2 hoses and check.



_________________
Citroen ZX 16V
Offline
 Profile  
 
 Post subject:
PostPosted: Sun Oct 05, 2008 4:46 pm 

Joined: Mon Sep 22, 2008 10:15 pm
Posts: 3
Razkin wrote:
I think the vacuumhoses at the electric solenoid aren't installed correctly. So switch those 2 hoses and check.


tnx a lot man that was problem 8) :D


Offline
 Profile  
 
 Post subject: Re:
PostPosted: Wed Jun 23, 2010 12:25 am 

Joined: Mon Dec 22, 2008 9:16 pm
Posts: 6
Location: greece
If i rev the engine the diaphragms will moves up and down normally. Is the ACAV systeme ok?? Anything else to check?



_________________
sotoszx
Offline
 Profile  
 
 Post subject: Re: Diaphragms
PostPosted: Wed Jun 23, 2010 10:34 pm 
User avatar

Joined: Sun Jul 24, 2005 11:35 am
Posts: 907
Location: Harderwijk - The Netherlands
They should move again @ 5k RPM.


Offline
 Profile  
 
 Post subject: Re: Diaphragms
PostPosted: Thu Jun 24, 2010 2:33 pm 

Joined: Mon Dec 22, 2008 9:16 pm
Posts: 6
Location: greece
ZX-Cruiser wrote:
They should move again @ 5k RPM.

Thanks you, i will check it



_________________
sotoszx
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 8 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron