| ZX16V.net http://www.zx16v.net/forum/ |
|
| Stainless steel exhaust http://www.zx16v.net/forum/viewtopic.php?f=17&t=608 |
Page 1 of 1 |
| Author: | bxzx16v [ Wed Dec 15, 2010 7:47 pm ] |
| Post subject: | Stainless steel exhaust |
Been considering putting a stainless exhaust on the Zx there's a specialist here in Sheffield ( exhausts uk ) and for around £300 they will make one to fit the Zx , just wondering how the car will respond from it and is it worth de-catting also , would the car run ok with the cat of and how mch would it affect the emissions etc for the Mot test ? Mark 
|
|
| Author: | Razkin [ Wed Dec 15, 2010 8:10 pm ] |
| Post subject: | Re: Stainless steel exhaust |
I do not know what the emission requirements are for the UK, but it probably wouldn't pass MOT. In Holland you can have maximum of 0,3% CO and without it's not possible to achieve that. My ZX is decated and has around 0,6% CO emissions. Your best bet is to buy a sport cat, doesn't restrict the flow as much as the original one, sport cat can be bought around €190,-. Throttle reaction will be a bit more responsive, but don't expect big power improvements. |
|
| Author: | bxzx16v [ Wed Dec 15, 2010 8:26 pm ] |
| Post subject: | Re: Stainless steel exhaust |
Thanks for the quick reply ,I had a stainless system fitted by the same company to my old fiat doblo 1.9jtd van and which was nippy to start with and after I had the system fitted it would REALLY pull like a train and it would pull very quickly through the gears , also the in gear accelleration was fantastic , the citroën dispatch 2.0hdi 110 bhp feels quick but doesn't have the response of the fiat which was 105bhp + whatever the gain was from the exhaust & decat , I did test drive a dispatch before the doblo which was quick but was a bit nasty , might get my dispatch chipped and see what that does , Mark. 
|
|
| Author: | ZX-Cruiser [ Thu Dec 16, 2010 10:57 pm ] |
| Post subject: | Re: Stainless steel exhaust |
Yup anything with a turbo on it will have more powerimprovement with an open exhaust then a NA engine. Modifying the exhaust is mostly for a nicer sound. The 16V I had with a chipped ECU and custom exhaust did about 160 measured HP. |
|
| Author: | Cromptons [ Sat Dec 18, 2010 9:22 am ] |
| Post subject: | Re: Stainless steel exhaust |
I've fitted a decatt to mine. Big start up is tomorrow! |
|
| Author: | bxzx16v [ Sat Dec 18, 2010 3:09 pm ] |
| Post subject: | Re: Stainless steel exhaust |
Hope everything goes well for tomorrow , Mark |
|
| Author: | dugy cam [ Sat Dec 18, 2010 4:19 pm ] |
| Post subject: | Re: Stainless steel exhaust |
i have a full stainless and the decat aswell.wont pass the mot but it not that bad a job changine around all is nice in loose with mine.mines a 306 s16 system just a diferent exhuast bracket at the back. |
|
| Author: | bxzx16v [ Sat Dec 18, 2010 6:07 pm ] |
| Post subject: | Re: Stainless steel exhaust |
Will bear that in mind Dugy , thanks , Mark |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|