ZX16V.net
http://www.zx16v.net/forum/

Seems flat low down in revs
http://www.zx16v.net/forum/viewtopic.php?f=17&t=777
Page 1 of 1

Author:  jakeszx [ Thu May 28, 2015 11:49 pm ]
Post subject:  Seems flat low down in revs

Hi wondering if anyone has had this problem with there 16v recently I've noticed my car seems to be low on power low down up to about 4000 rpm as a little hesitant but does run fine. Has anyone got any advise thanks

Author:  jakeszx [ Fri Jun 05, 2015 3:55 pm ]
Post subject:  Re: Seems flat low down in revs

Problem FIXED! It was a fault with acav my inlet flaps wasn't moving fault turned out to be with the T piece in the vac pump and has some sort of one way valve in it and that's where the vacuum comes from to operate the system.

Author:  Razkin [ Wed Mar 30, 2016 7:18 pm ]
Post subject:  Re: Seems flat low down in revs

That piece is usually the most reliable part of the ACAV system, apart from breaking off the thin pipe yourself when removing it.

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/