| ZX16V.net http://www.zx16v.net/forum/ |
|
| Seems flat low down in revs http://www.zx16v.net/forum/viewtopic.php?f=17&t=777 |
Page 1 of 1 |
| Author: | jakeszx [ Thu May 28, 2015 11:49 pm ] |
| Post subject: | Seems flat low down in revs |
Hi wondering if anyone has had this problem with there 16v recently I've noticed my car seems to be low on power low down up to about 4000 rpm as a little hesitant but does run fine. Has anyone got any advise thanks |
|
| Author: | jakeszx [ Fri Jun 05, 2015 3:55 pm ] |
| Post subject: | Re: Seems flat low down in revs |
Problem FIXED! It was a fault with acav my inlet flaps wasn't moving fault turned out to be with the T piece in the vac pump and has some sort of one way valve in it and that's where the vacuum comes from to operate the system. |
|
| Author: | Razkin [ Wed Mar 30, 2016 7:18 pm ] |
| Post subject: | Re: Seems flat low down in revs |
That piece is usually the most reliable part of the ACAV system, apart from breaking off the thin pipe yourself when removing it. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|