ZX16V.net http://www.zx16v.net/forum/ |
|
RG192 16V's http://www.zx16v.net/forum/viewtopic.php?f=2&t=380 |
Page 2 of 5 |
Author: | RG192 [ Sat May 10, 2008 2:56 pm ] |
Post subject: | |
new purchase for the 16v, the manufacturer stops production therefore you buy for there to even! |
Author: | dugy cam [ Tue May 27, 2008 9:36 pm ] |
Post subject: | |
looking good u got them on the car yet.intresting to c how they look |
Author: | edsonmassao [ Wed May 28, 2008 3:48 am ] |
Post subject: | |
humm, curious too to see these black projectors installed in a white ZX! |
Author: | RG192 [ Wed May 28, 2008 9:28 pm ] |
Post subject: | |
installation is not planned at this time. but it should make good. the fact is that I met you pics. |
Author: | RG192 [ Sun Apr 05, 2009 11:30 pm ] |
Post subject: | Re: RG192 16V's |
google translation sorry Some news after two years on candles. Work since the purchase: - Change the gearbox - Reduction of engine flywheel - Blaxonnage bedrock - Change of triangles + SB + SB kneecaps bar stab - Change of direction bearings - Assembling double fan motor - Change of rods command box - Installation of 306 S16 brakes 283mm - New cable hand brake - Aviation Hose front + rear (front to mount yet) - Mounting Eibach springs (-30) - Bar-lower and upper approximation - Drain engine, gearbox, brake fluid and cooling - Hurricane 206 wheels (in the absence of the parties who are mans ...: () - Distribution. - Change the air filter for a JR - Mounting a stainless decat DEVIL and inter + silencieux BFR also stainless steel. - Remove the spare wheel and the basket Upcoming Events: - A very big cleaning - Parallelism - Passage of cables - Mounting dashboard Xsara - Assembling the interior leather. - Upgrading rear + assembling + decrantage grease. - Tinted Windows. a little pics: roll: Attachment: Copie de 05042009515.jpg [ 79.15 KiB | Viewed 11254 times ] |
Author: | majestic3jay [ Mon Apr 06, 2009 2:27 pm ] |
Post subject: | Re: RG192 16V's |
Quote: Following a coil HS and the dismantling of the cylinder head covers it reprofite to renovate a bit ... I definitely wanna do the same thing, how do you do that!?!?! Please tell me more! |
Author: | RG192 [ Mon Apr 06, 2009 10:32 pm ] |
Post subject: | Re: RG192 16V's |
sandpaper and elbow grease |
Author: | RG192 [ Sat Apr 18, 2009 3:55 pm ] |
Post subject: | Re: RG192 16V's |
xsara dashboard mount. |
Author: | jaredboy [ Sat Apr 18, 2009 10:11 pm ] |
Post subject: | Re: RG192 16V's |
Does the Xsara dashboard fit straight inn? Or is there some parts that do need modification for it to fit in a ZX? |
Author: | marcinmrc [ Thu Apr 23, 2009 4:54 pm ] |
Post subject: | Re: RG192 16V's |
it is plug and play. only one problem is in electrical system because it is a little bit different but it is doable do you have seats from xsara there also ? |
Author: | RG192 [ Sat Apr 25, 2009 10:14 pm ] |
Post subject: | Re: RG192 16V's |
marcinmrc wrote: it is plug and play. only one problem is in electrical system because it is a little bit different but it is doable do you have seats from xsara there also ? exactly! My seats are zx seats. but xsara seats those amounts also, there will be a slight change against the back seat. (google traduction, sorry) |
Author: | RG192 [ Mon Apr 27, 2009 2:57 pm ] |
Post subject: | Re: RG192 16V's |
Author: | dugy cam [ Wed Apr 29, 2009 6:56 pm ] |
Post subject: | Re: RG192 16V's |
nice idea with the dash very clever looks nice suites it first time i have since that done u never no maybe the first.ur cars cuming allong nicey.wat next uplaning |
Author: | RG192 [ Wed Apr 29, 2009 10:06 pm ] |
Post subject: | Re: RG192 16V's |
thank's tinted windows, phase 2 hood |
Author: | dugy cam [ Thu Apr 30, 2009 7:03 pm ] |
Post subject: | Re: RG192 16V's |
i used to have the phase 2 but i prefer the phase 1 along with the phase 1 wheels lol.plus i hated my bonnet vent. |
Page 2 of 5 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |