ZX16V.net http://www.zx16v.net/forum/ |
|
[mrc] ZX 16V from Poland http://www.zx16v.net/forum/viewtopic.php?f=2&t=397 |
Page 2 of 4 |
Author: | marcinmrc [ Thu Apr 23, 2009 3:19 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
Hi I've made a lot of changes since my last post here. Lets start from the beginning: * I fixed ACAV system * I fixed air condition and changed all radiators inside and also clean AC system * I put extra slat on doorstep from Citroen XM * Extra light inside a car adapted from Citroen XM * I used WaxGuard from Toyota Service * New rugs * I put a switches to subwoofer and interior light from XM * I made a dyno-test the engine haven't been modified and everything is standard there. I put inside a Sequential Gas Injection and made two tests. First on 95 octane petrol and second on gas and the results I put below. First is on petrol and second on gas |
Author: | marcinmrc [ Thu Apr 23, 2009 4:02 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
* I'm also sometimes using this car * I modified an air intake system by changing pneumothorax(?) system and make all intake system longer. I put air filter in front bumper on a side and cover from water. I also out there a thermometer with a screen inside. the temperature of air is between 15 and 18 degrees of Celsius when the car is on run. * Car was in ASO Citroen and they checked all gauges in car, abs pomp and all electrical system inside and everything is working OK * I bouht CB Radio Uniden with Sirio antene * I installed electric left mirror |
Author: | marcinmrc [ Thu Apr 23, 2009 4:11 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
* Last winter in Poland * Check this out, fotogallery: http://marcinmrc.jalbum.net/mrc_zx16v/ * I fixed front bumper and bought new headlights * My car got new rear suspension with new dish and rootlet. I also lowered rear about 5 centimetres. |
Author: | marcinmrc [ Thu Apr 23, 2009 5:02 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
Current view after lowering, fixing bumper and with new headlights and tyres. |
Author: | ZX-Cruiser [ Thu Apr 23, 2009 6:27 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
Big update What happened to your AC to make it foam like that ?? I also notice lots of 27MC antennas on cars with Polish license plates here in the Netherlands, it is quite popular over there I think |
Author: | marcinmrc [ Thu Apr 23, 2009 6:35 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
i was cleaning all pipes and i used the foam in spray. you put it inside and run AC and it clean pipes and all AC system from insects and dust yes CB is very popular in Poland. it isn't expensive and it make your way safe and nice because you can talk to other drivers and ask for way and police |
Author: | dugy cam [ Wed Apr 29, 2009 6:58 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
nice zx16v very clean sparkling |
Author: | rookinio [ Thu May 07, 2009 7:04 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
Exelent photos.... |
Author: | edsonmassao [ Wed Jun 17, 2009 5:28 am ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
it seems you are doing fine with your ZX. good job |
Author: | kaczart [ Sun Mar 14, 2010 11:33 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
Mrc where did you bought this fantastic body kit? Is that musketier? btw. very nice exhaust :p |
Author: | marcinmrc [ Tue Sep 25, 2012 12:13 am ] | |||
Post subject: | Re: [mrc] ZX 16V from Poland | |||
yeah very good photo and better meeting as well :) last time I made a lot of things in my ZX first of all I got rear bumper with complete exhaust from musketier and morette headlights i got also hood air intake dedicated to zx from musketier last time i got new steering wheal with leather and I repair original alarm and some updates: photos of exterior are with winter wheals
|
Author: | marcinmrc [ Wed Sep 04, 2013 10:28 am ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
Hello, I'm writing here only to inform that my car is still riding well without any problems and without big repairs. I'm thinking about paint it but I'm not sure if I really need it. Maybe it would be good after 6 years to change the color, could you propose me some? In amount of time I bought some stuff like headlamp, air intake, exhaust and rear bumper from Musketier which I have wrote about but they are still waiting in garage. I also got chip with sport soft for ECU but I'm not using it. Some time ago I install onboard computer from http://www.reveltronics.com and it works perfectly. I also install seat heater and massage for driver seat. Great things which are put on my front bumper are headlamp washers. What make me happy so much I fixed ABS. Which is more funny I diagnosed all wires, connectors, I changed all sensors and after that I found that ABS ECU need to be change. It takes me 6 years :) Some days ago we have great meeting of Polish users of ZX 16V. |
Author: | bxzx16v [ Wed Sep 04, 2013 5:00 pm ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
I wouldn't change the colour , it's nice colour you've got there . Heve you any pics of the Zx16v meet ? Keep up the work on the car their very special cars these . Mark |
Author: | marcinmrc [ Tue Nov 26, 2013 10:11 am ] | ||||
Post subject: | Re: [mrc] ZX 16V from Poland | ||||
ZX have already passed yearly technical review with good opinion. Some time ago I have fixxed front brakes and they are working good now. In some days I want to improve some front suspension and put winter tires.
|
Author: | bxzx16v [ Wed Nov 27, 2013 1:49 am ] |
Post subject: | Re: [mrc] ZX 16V from Poland |
Nice pics . Mark |
Page 2 of 4 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |