Welcome
Pics!
| ZX16V.net http://www.zx16v.net/forum/ |
|
| MY FIRST 16V http://www.zx16v.net/forum/viewtopic.php?f=2&t=446 |
Page 1 of 5 |
| Author: | my911gt2 [ Sun Mar 29, 2009 8:54 pm ] |
| Post subject: | MY FIRST 16V |
I JUST BOUGHT MY VERY FIRST 16V ZX , YAY I HAVE A TD VOLCANE AND ALSO A 1.9 8V VOLCANE BUT NOW I HAVE A 16V YAY THIS WILL BE MY RACE CAR , I WILL BE BRAKING THE 1.9 5DOOR VOLCANE ANYONE NEED ANYTHING ? CANT WAIT TO GET HER ON THE ROAD , YAY |
|
| Author: | ZX-Cruiser [ Mon Mar 30, 2009 9:54 pm ] |
| Post subject: | Re: MY FIRST 16V |
Welcome Pics! |
|
| Author: | my911gt2 [ Mon Mar 30, 2009 10:07 pm ] | ||
| Post subject: | Re: MY FIRST 16V | ||
there she is . now to start doing to work to make her my race car
|
|||
| Author: | jaimieberkhout [ Tue Mar 31, 2009 8:16 pm ] |
| Post subject: | Re: MY FIRST 16V |
What is your plan to make her a race car? And what for ingen dit she have? A 155 hp ore a 167 hp |
|
| Author: | my911gt2 [ Wed Apr 01, 2009 3:07 pm ] |
| Post subject: | Re: MY FIRST 16V |
hi , it is the 155hp , yeh i have twin 45 eber carburettor's, high lift cam shaft , gas flowed cyclinder head , new inlet valve angles and seats / 6 speed gear box , big front brakes , full suspenion kit, stainless steel exhaust system , harness , seats , omp cage soon to be ordered , block decked to rase CR to 11:1 i have most of the parts now , i just need to get the last few bits done, |
|
| Author: | jaimieberkhout [ Wed Apr 01, 2009 6:56 pm ] |
| Post subject: | Re: MY FIRST 16V |
Oh sound's nice. Good luck and keep posting. 
|
|
| Author: | my911gt2 [ Thu Apr 02, 2009 4:47 pm ] |
| Post subject: | Re: MY FIRST 16V |
yeh i will try my best . i collect her tomorrow night so looking fwd to seeing her , |
|
| Author: | dugy cam [ Sun Apr 05, 2009 7:55 pm ] |
| Post subject: | Re: MY FIRST 16V |
IM SURE U WILL HAVE FUN WAT PLANS U GOT FOR UR CAR THEN |
|
| Author: | my911gt2 [ Mon Apr 06, 2009 6:10 pm ] |
| Post subject: | Re: MY FIRST 16V |
so were is the best place to buy uprated parts then ? anyone know |
|
| Author: | edsonmassao [ Wed Jun 17, 2009 5:56 am ] |
| Post subject: | Re: MY FIRST 16V |
my911gt2 wrote: so were is the best place to buy uprated parts then ? anyone know the guys of 306gti6 forum knows about some places...do you know http://www.demon-tweeks.co.uk/ and www.larkspeed.com ? |
|
| Author: | my911gt2 [ Sun Oct 04, 2009 11:40 pm ] |
| Post subject: | Re: MY FIRST 16V |
and so the work goes on ,. really starting to take shape , but i have spend £3500 on her so far lol all this for a old zx 16v , lol |
|
| Author: | ZX-Cruiser [ Sat Nov 14, 2009 6:44 pm ] |
| Post subject: | Re: MY FIRST 16V |
Topicmove -> Show Your ZX |
|
| Author: | dugy cam [ Thu Dec 03, 2009 7:40 pm ] |
| Post subject: | Re: MY FIRST 16V |
weres the magical pictures of it then |
|
| Author: | my911gt2 [ Tue Dec 22, 2009 11:25 pm ] |
| Post subject: | Re: MY FIRST 16V |
its getting there , slowly , but it is worth the wait pics will be uploaded in a few days , |
|
| Author: | my911gt2 [ Thu Dec 24, 2009 12:08 am ] |
| Post subject: | Re: MY FIRST 16V |
my new rebuilt zx 16v engine , cat cams block decked 3rd valve angle cut lighted fly wheel balanced bottom end gti6 box ported and gas flowed head fully rebuilt , every gasket and seal new new pullys set up for 45 weber carbs alloy sum fitted forged pistons and rods new lifters new coil packs mocal oil cooler kit waiting for - new coolant hoses alloy bottom pully final engine clean and prep , new dip stick i would like to know your thoughts , i have spent alot of time doing this engine for my citroen lol , thanks |
|
| Page 1 of 5 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|