It is currently Thu Mar 28, 2024 9:09 pm

All times are UTC + 2 hours




 Page 4 of 4 [ 59 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 Post subject: Re: My 16V
PostPosted: Sun Jun 26, 2011 7:18 pm 

Joined: Thu Jan 06, 2011 8:36 pm
Posts: 51
Location: Norway
I am getting close to start up, but i have some trouble with the electrical. First i have dismantled a Defa warm up unit. This has been connected trough several wires. I have some bad or wrong connections that i need to sort out. I post some pic from the wires that goes out from the ignition switch. I seem to have one wire too many ?
Image

I also wonder of anyone know what kind of relays that are sitting behind the steering wheel. I do not have any book that explains. I am just courios to know, se pictures.
Image

The car also have a factory alarm. Anyone know if this unit can be dismantled?



_________________
eagle
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Mon Jun 27, 2011 7:55 pm 
Site Admin
User avatar

Joined: Thu Jan 15, 2009 6:51 pm
Posts: 566
Location: Amsterdam
Check wink
Image


Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Mon Jun 27, 2011 10:14 pm 

Joined: Thu Jan 06, 2011 8:36 pm
Posts: 51
Location: Norway
Hello,

Thanks a lot for your help.



_________________
eagle
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Mon Aug 15, 2011 9:50 pm 
Site Admin
User avatar

Joined: Thu Jan 15, 2009 6:51 pm
Posts: 566
Location: Amsterdam
You mean this whit canister box???
Image

That belang here
Image
Right under the abs pump.


Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Sun Oct 23, 2011 11:21 pm 

Joined: Thu Jan 06, 2011 8:36 pm
Posts: 51
Location: Norway
Hello,
Its been a while since last time. Dont know why but it seems like i am constantly running out of time !!! Well to be honest i been doing some other priorities, but the ZX is far from forgotten. I still have some more work to be done in the front, but I have also started at the rear of the car, its time to get the car dropped a little and i have pulled the axel out and i will be going over the brakelines, calipers and bushings as well. The project is coming on nicely and a bit slow.

Image
[/iImage
mg]Image
[imgImage
Image
Image



_________________
eagle
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Mon Oct 24, 2011 9:25 am 
Site Admin
User avatar

Joined: Thu Jan 15, 2009 6:51 pm
Posts: 566
Location: Amsterdam
Good luck whit the rear axel. Most of the time its a hel of a job. I realy
Like your car and your project wink


Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Mon Oct 24, 2011 5:44 pm 

Joined: Fri Sep 17, 2010 10:35 pm
Posts: 336
Fantastic project , keep up the great work

Mark


Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Tue Oct 25, 2011 11:08 pm 

Joined: Thu Jan 06, 2011 8:36 pm
Posts: 51
Location: Norway
Thanks for your nice replies. I know that the rear axle can be a pain in the ass, but i will give it a try. I have a back up plan if it fails. Learning by walking.....



_________________
eagle
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Sun Oct 30, 2011 9:01 pm 

Joined: Thu Feb 15, 2007 10:11 pm
Posts: 391
Location: SCOTLAND
how much you droping it by



_________________
16V DAKAR AND WIDEARCHED 16v got another i love them
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Sun Oct 30, 2011 10:58 pm 

Joined: Thu Jan 06, 2011 8:36 pm
Posts: 51
Location: Norway
I am not sure actually, i have a 40mm lowering in front and was thinking 25-30mm.



_________________
eagle
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Fri Aug 03, 2012 12:43 am 

Joined: Thu Jan 06, 2011 8:36 pm
Posts: 51
Location: Norway
Well, finally some progress. I dismantled the axle, not a very pleasent job by the way. The tube on one side was completly shot, i then decided to order a rebuild one, got it from UK. Meanwhile i have had the gas tank out and have undercoated the body, also had to weld a whole as the jack has been used wrong. I work on the car when i have time to do so, to many other projects. I am now welding on my better half Saxo Vts, dident now they rust !!

[img][IMG]http://i1128.photobucket.com/albums/m499/eagle59/SAM_1490.jpg[/img]ImageImage[/img]



_________________
eagle
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Fri Aug 03, 2012 12:46 am 

Joined: Thu Jan 06, 2011 8:36 pm
Posts: 51
Location: Norway
[imgImage][/img]



_________________
eagle
Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Fri Aug 03, 2012 8:36 pm 

Joined: Mon Jul 23, 2012 9:47 pm
Posts: 13
cracking project eagle love the workshop keep up the good work! :lol:


Offline
 Profile  
 
 Post subject: Re: My 16V
PostPosted: Fri Aug 03, 2012 9:17 pm 

Joined: Fri Sep 17, 2010 10:35 pm
Posts: 336
That really is great work , keep the updates coming .

Mark


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 4 of 4 [ 59 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

cron