It is currently Thu Mar 28, 2024 8:40 pm

All times are UTC + 2 hours




 Page 1 of 1 [ 7 posts ] 
Author Message
 Post subject: Bodykit removal
PostPosted: Thu Mar 01, 2012 10:02 pm 

Joined: Fri Sep 17, 2010 10:35 pm
Posts: 336
I am looking at taking the wheel arches and sills off the Zx to clean behind etc , what i want to know is will the clips break off as I think replacements are unavailable . Or will the clips survive ? If they do break are there any alternatives such as Xsara/pug 306 clips if they are the same . Thanks

Mark


Offline
 Profile  
 
 Post subject: Re: Bodykit removal
PostPosted: Thu Mar 01, 2012 10:17 pm 

Joined: Thu Feb 15, 2007 10:11 pm
Posts: 391
Location: SCOTLAND
u never no u might be lucky and do it nice and gently andthey might surivie mine didnt they got very brittle.

i just bought new ones on ebay they did the trick so not to worry



_________________
16V DAKAR AND WIDEARCHED 16v got another i love them
Offline
 Profile  
 
 Post subject: Re: Bodykit removal
PostPosted: Thu Mar 01, 2012 10:21 pm 

Joined: Fri Sep 17, 2010 10:35 pm
Posts: 336
Cheers dugy , I will look for some new ones just to be on the safe side

Mark


Offline
 Profile  
 
 Post subject: Re: Bodykit removal
PostPosted: Fri Mar 02, 2012 1:11 am 

Joined: Fri Jan 05, 2007 5:06 pm
Posts: 138
Location: Cardiff Wales
clips are available, I bought some a few months ago.


Offline
 Profile  
 
 Post subject: Re: Bodykit removal
PostPosted: Fri Mar 02, 2012 7:51 am 

Joined: Fri Sep 17, 2010 10:35 pm
Posts: 336
Thanks again

Mark


Offline
 Profile  
 
 Post subject: Re: Bodykit removal
PostPosted: Sat Mar 03, 2012 9:36 pm 

Joined: Wed Jun 16, 2010 9:40 pm
Posts: 32
Welsh pug: where can you get the bottom sill clips (7030 11)? As Can't get them anywhere...

Mark you will brake most of the above clips when removing (about 12 each side)

So far I've managed to buy 5....


Offline
 Profile  
 
 Post subject: Re: Bodykit removal
PostPosted: Sat Mar 03, 2012 9:46 pm 

Joined: Fri Sep 17, 2010 10:35 pm
Posts: 336
Thanks James , it's the o/s/f arch i need to remove to do a small repair behind . I'll hold fire until I can source some .

Mark


Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 7 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron